CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Cruise Control Module: Testing and Inspection
SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS before performing repairs or
service.
1. Remove the driver's dashboard lower cover and knee bolster.
2. Disconnect the 14P connector from the control unit.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
If the terminals look OK, make the following input tests at the connector.
