CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Seat Belt: Service and Repair
Front Seat Belt Buckle
SRS components are located in this area. Review the SRS component locations, precautions, and procedures before performing repairs or service.
CAUTION: Check the front seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
Seat Belt Buckle
1. Slide the front seat forward fully.
2. Remove the center cover.
Seat Belt Buckle
3. Driver's: Disconnect the seat belt switch connector, and detach the harness clips from the seat cushion frame.
Seat Belt Buckle
4. Remove the center anchor bolt, then remove the seat belt buckle. Pull out the seat belt switch harness (with seat belt switch).
5. Installation is the reverse of the removal procedure.