CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Starter Motor: Service and Repair
Removal and Installation
1. Disconnect the battery negative cable.
2. Disconnect the starter cable from the B terminal on the solenoid, then disconnect the BLK/WHT wire from the S terminal.
3. Remove the two bolts holding the starter, then remove the starter.
Starter Cable Installation
4. Install in the reverse order of removal. When installing the starter cable, make sure that the crimped side of the ring terminal is facing out.
5. Connect the battery positive cable and negative cable to the battery.
