CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Suspension Strut / Shock Absorber: Service and Repair
Removal and Replacement Strut
Front Wheelhouse/Damper Housing
Mass Production Body Welding Diagram
The front wheelhouse component is constructed as a unit with the front damper housing. Therefore, replacement of the component affects the front wheel
alignment. When assembling it, either use a positioning jig or follow the dimensions on the frame repair chart for positioning. Weld carefully.
NOTE: Replace the front wheelhouse extension and damper housing as an assembly.
Replacement
1. Remove the related parts.
-
Parts that must be removed when removing the front bulkhead
-
Parts on passenger side of lower dashboard which are especially flammable.
