CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Shift Control Solenoid Valve: Service and Repair
NOTE: Shift control solenoid valves A and B must be removed/replaced as an assembly.
1. Remove the shift control solenoid cover.
2. Remove the mounting bolts, the clamp and the shift control solenoid valve A/B assembly, then disconnect the connector.
3. Clean the mounting surface and fluid passages, and install a new shift control solenoid valve A/B assembly with the clamp and a new filter/gasket.
4. Install the shift control solenoid cover.
5. Check the connector for rust, dirt, or oil, and reconnect it securely.
