CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Lock-up Control Solenoid Valve: Service and Repair
NOTE: Lock-up control solenoid valves A and B must be removed/replaced as an assembly.
1. Remove the mounting bolts and the lock-up control solenoid valve A/B assembly.
2. Clean the mounting surface and fluid passages, and install a new lock-up control solenoid valve A/B with a new filter/gasket.
3. Check the connector for rust, dirt, or oil, and reconnect it securely.
