CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
4. Remove the friction damper from the spacer using a press and a socket.
5. Support 1st gear on steel blocks, and press the countershaft out of 3rd gear.
INSPECTION
Inspect countershaft and related components.
ASSEMBLE
NOTE:
-
Press the 3rd, 4th, and 5th gear on the countershaft without lubrication.
-
When installing the 3rd, 4th, and 5th gears, support the shaft on steel blocks and install the gears using a press.