CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
-
Paint is flammable. Store it in a safe place, and keep it away from sparks, flames, or cigarettes.
-2. Spraying
Spray the paint to make the resin-pattern painting.
NOTE:
-
Apply 2-2.5 coats in two directions to make the resin-pattern painting.
-
Spray the paint for lusterless.
-
Do not try to cover the surface with heavy coat.
WARNING:
-
Ventilate when spraying paint. Most paint contains substances that are harmful if inhaled or swallowed. Read the paint label
before opening the paint container.
-
Avoid contact with skin. Wear an approve d respirator, gloves, eye protection, and appropriate clothing when painting.
-
Paint is flammable. Store it in a safe place, and keep it away from sparks, flames, or cigarettes.
13. Drying top coat
WARNING: Body parts being dried with an industrial dryer can get hot enough to cause injury. Do not touch parts being dried.
-
Before force drying, let it air dry for about 10 minutes.
-
Force dry the sprayed surface under the infrared lamps for 60-90 minutes.
-
Keep the drying temperature between HOT (60 degrees C).
NOTE: Take care not to let the heat deform the part during the during process.
General Information
General
The front grille and door mirror are made from ABS resin.
They can be repaired if the damage or deformation is minor in nature. This section covers ABS repair. Repairing ABS is different from other resins such
as PP and urethane.
