CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
4. Installation is the reverse of the removal procedure.
NOTE:
-
Make sure the handle rod and latch stop rod are connected properly.
-
Make sure the tailgate door locks and opens properly.
-
After installing the latch stop and tailgate door latch, make sure that there is about 1 mm (0.039 in.)between the link A and link B of the latch
stop. Adjust the joint position of the latch stop rod as needed, then check the latch stop operation. (Pull the tailgate door handle while you push
on the latch stop knob; the tailgate door should not open.)
