CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Connecting Rod: Specifications
Service Specifications
End Bore Size
Bore:
Small End .......................................................................................................................................................... 20.968-20.981 mm (0.8255-0.8260 inch)
Bore:
Large End
Normal Bore Size: ....................................................................................................................................................................... 48.0 mm (1.89 inch)
Each rod falls into one of four tolerance ranges (from 0 to 0.024 mm (0.0009 inch), in 0.006 mm (0.0002 inch) increments) depending on the size of
its big end bore. It's then stamped with a number (1, 2, 3, or 4) indicating the range. You may find any combination of 1, 2, 3, or 4 in any engine.
Note: for more information see Testing and Inspection / Selection.
