CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Connecting Rod: Testing and Inspection
Bearing Selection
Each rod falls into one of four tolerance ranges (from O to + 0.024 mm (0 to + 0.0009 inch), in 0.006 mm (0.0002 inch) increments) depending on the
size of its big end bore. It's then stamped with a number (1, 2, 3, or 4) indicating the range.
You may find any combination of 1, 2, 3, or 4 in any engine.
Normal Bore Size: 48.0 mm 11.89 inch)
Inspect the connecting rod for cracks and heat damage.
