CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
11. Apply liquid gasket part No. 08718-0001 or 08718-0003 evenly to the block mating surface of the right side cover and to the inner threads of the
bolt holes. Install it on the cylinder block.
NOTE:
-
Do not install the parts if five minutes or more have elapsed since applying the liquid gasket. Instead, reapply liquid gasket after removing the
old residue.
-
After assembly, wait at least 30 minutes before filling the engine with oil.
12. Apply liquid gasket to the oil pump mating surface of the block.
13. Apply a light coat of oil to the crankshaft, the lip of the seal, and the O-rings.
14. Apply grease to the lips of the oil seals.
