CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
4. Loosen and retighten the adjusting bolt to tension the timing belt.
5. Clean, then install the lower cover and middle cover.
6. Install the crankshaft pulley, then tighten the pulley bolt.
7. Rotate the crankshaft pulley about five or six turns counterclockwise so that the timing belt positions on the pulleys.
8. Adjust the timing belt tension.
9. Check that the crankshaft pulley and camshaft pulleys are both at TDC.
10. If the camshaft pulleys are not positioned at TDC, remove the timing belt, adjust the position, then reinstall the timing belt.
11. Install the cylinder head cover.
12. After installation, adjust the tension on each belt.
-
See Drive Belts, Mounts, Brackets and Accessories / Drive Belts / Adjustments.
