honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Trailer Lamps > < Diagram Information and Instructions|Page 6947
Page 1
background image

Tail Lamp: Service and Repair

1. Open the hatch glass.
2. Disconnect the 5P connector from the taillight.

3. Remove the three screws, then pull out the outer taillight.
4. Inspect the gasket; replace it if it is distorted or stays compressed.
5. Install the taillight, and run water over it to make sure it does not leak.

Trailer Lamps > < Diagram Information and Instructions|Page 6947