CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Timing Belt: Service and Repair
Removal and Installation
REMOVAL
Replace the timing belt at 105,000 miles (168,000 km) according to the maintenance schedule (normal conditions/severe conditions). If the vehicle is
regularly driven in either of the following conditions, replace the timing belt at 60,000 miles (U.S.A.) 100,000 km (Canada).
-
In very high temperatures (over 110°F, 43°C).
-
In very low temperatures (under -20°F, -29°C).
1. Turn the crankshaft pulley so the No. 1 piston is at Top Dead Center (TDC).
2. Remove the guard bar and splash shield.
3. Loosen the mounting bolt and lock bolt, then remove the Power Steering (P/S) pump belt.
4. Loosen the idler pulley bracket bolt and adjusting bolt, then remove the Air Conditioning (A/C) compressor belt.
5. Loosen the mounting nut and locknut, then remove the. alternator belt
6. Remove the cruise control actuator.
