CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Retractor Bolt Construction
NOTE:
-
Check that the retractor locking mechanism functions properly as described.
-
Assemble the washers, collar and bushing on the upper and lower anchor bolts as shown.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the front seat belt.
-
Make sure the seat belt tensioner connector is connected securely.
-
Enter the anti-theft code for the radio, then enter the customer's radio station presets.
Seat belt buckle:
1. Slide the front seat forward fully.
2. Remove the center cover.
3. Driver's: Disconnect the seat belt switch connector, and detach the harness clips from the seat cushion frame.
