CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
7. Driver's: If equipped with seat heater, remove the harness band (A), and disconnect the seat sub- harness connector (B). Without seat heater,
detach the seat belt switch connector clip (C). Detach the seat belt buckle tensioner clip (D), and harness clip (E).
8. Passenger's: If equipped with side airbag or seat heater, remove the harness band (A), and disconnect the seat sub-harness connector (B). Without
side airbag, detach the seat belt switch connector clip (C) from the harness bracket (D). Detach the seat belt buckle tensioner connector clip (E)
from the harness bracket.
9. Remove the center anchor bolt (A), and remove the seat belt buckle (B).
10. Detach the harness clip (C), and pull the seat belt switch/tensioner harness (D) out through the space between the seat cushion and the seat linkage
(driver's seat), or the hole on the seat track (passenger's seat).
