CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Wheel Speed Sensor: Service and Repair
Rear
NOTE:
-
Be careful when installing the sensors to avoid twisting the wires.
-
The torque value of the bolts is 9.8 Nm (1.0 kgf.m, 7 ft. lbs.).
1. Remove the hub bearing unit.
2. Remove the four backing plate bolts.
3. Pull the backing plate away from the trailing arm, then remove the wheel sensor. It is not necessary to disconnect the brake line.
