CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Fuel Gauge Sender: Testing and Inspection
Fuel Gauge Sending Unit
WARNING: Do not smoke while working on the fuel system. Keep open flame away from your work area.
1. Fold the left rear seat cushion forward, and remove the base frame cover.
2. Remove the access panel.
3. With the ignition switch OFF, disconnect the 5P connector from the fuel pump.
4. Relieve fuel pressure.
5. Disconnect the fuel lines.
6. Remove the fuel pump.
