CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
3. Remove the brake drum from the hub by threading 8 x 1.25 mmbolts into the drum to push it away from the hub bearing unit. Turn each bolt two
turns at at time to prevent cocking the drum excessively.
4. Raise the locking tab on the spindle nut, then remove the nut.
5. Remove the brake shoes.
6. Remove the parking brake cable from the backing plate using a 12 mm offset wrench as shown.
7. Disconnect the brake line from the wheel cylinder.
8. Remove the wheel sensor from the backing plate (for vehicles with ABS). Do not disconnect the wheel sensor connector.
