CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Throttle Valve Solenoid: Testing and Inspection
1. Disconnect the A/T clutch pressure control solenoid valve connector.
2. Measure the resistance between the No. 1 and the No. 2 terminals.
STANDARD: About 5.0 Ohms
3. If the resistance is out of specification, replace the A/T clutch pressure control solenoid valve.
4. Connect the No. 1 terminal of the connector to the battery positive terminal and the No. 2 terminal to the battery negative terminal. A clicking
sound should be heard.
5. If a clicking sound is not heard, remove the A/T clutch pressure control solenoid valve.
6. Check the A/T clutch pressure control solenoid valve fluid passage for dust or dirt.
7. Connect the No. 1 terminal of the connector to the battery positive terminal and the No. 2 terminal to the battery negative terminal. Make sure that
the valve moves.
8. Disconnect the negative battery terminal, and make sure the valve releases. You can see valve movement through the fluid passage in the mounting
surface of the A/T clutch pressure control solenoid valve.
9. If the valve binds, or moves sluggishly, or if the A/T clutch pressure control solenoid valve does not operate, replace it.
