CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
5. Measure distance (B) between the end of the clutch housing and bearing inner race.
NOTE:
-
Use a straight edge and depth gauge.
-
Measure at three locations and average the readings.
6. Select the proper 78 mm shim from the chart by using the formula. From the measurements you made in steps 4 and 5:
a. Add distance (B) (step 5) to distance (A) (step 4).
b. From this number, subtract 0.93 (which is the midpoint of the flex range of the clutch housing bearing spring washer).
c. Take this number and compare it to the available shim sizes in the chart. (For example) A: 2.39 + B: 0.22 = 2.61 - 0.93 = 1.68. Try the 1.68
mm (0.0661 inch) shim.
7. Check the thrust clearance in the manner described.
NOTE: Measurement should be made at normal room temperature.
