CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Shift Interlock Solenoid: Service and Repair
SRS components are located in this area. Review the SRS component locations, precautions, and procedures before performing repairs or service.
1. Remove the instrument panel lower cover.
2. Remove the upper and lower steering column covers.
3. Remove the flange nuts and bolts securing the steering column, then lower the steering column.
4. Disconnect the shift lock solenoid and the park pin switch connectors.
5. Remove the bolts securing the shift lever assembly, then remove the shift lever assembly.
6. Remove the screws securing the shift lock solenoid, then remove the shift lock solenoid.
7. Install the new shift lock solenoid by aligning the joint of the plunger spring with the tip of the shift lock extension
8. Secure the shift lock solenoid with the screws.
9. Install the shift lever assembly in the reverse order of the removal.
10. Check the operation of the shift lever and the shift lock.
