CR-V LX 4WD L4-2.4L (2002)
8. While pulling the outer handle (A), remove the handle from the holes in the door panel. Take care not to scratch the door.
9. Install the handle in the reverse order of removal, and note these items:
-
Make sure each rod is connected securely.
-
Make sure the door locks and opens properly.
-
When installing the lock cylinder, leave the outer door handle bolts loose so the inner protector does not interfere with the lock cylinder
installation, then tighten the handle bolts.
-
Install the lock cylinder retaining clip on the handle, then install the lock cylinder. Be sure the clip is fully seated in the slot on the lock
cylinder.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its perimeter.
