CR-V LX 4WD L4-2.4L (2002)
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1.
Obtain the customer's key code from the iN (Key Code Inquiry). Refer to the Honda High Security key Codes book that comes with the Matrix H
key cutting machine. Write down the applicable cutting code for the key code number. Make sure the corrections to the code book listed in Service
Bulletin 01-077, Cutting Sidewinder-Type keys With the Matrix H key Cutting Machine, have been made.
2.
Use the chart shown to write down the numbers found in the key code book.
3.
Remove the door panel. Refer to the appropriate service manual or use ISIS keyword Door Panel.
4.
Remove the plastic cover as necessary.
5.
Raise the window glass fully.
6.
Remove the lock cylinder.
^
For Civic, go to step 7.
^
For CR-V, go to step 8.
^
For Element, go to step 11.
7.
Pull down on the retainer clip with a hook-shaped tool. Remove the lock cylinder and disconnect the cylinder rod. Then go to step 14.
