CR-V LX 4WD L4-2.4L (2002)
Arm Rest: Service and Repair
Rear Seat Armrest Cover
Rear Seat Armrest Cover Replacement
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
1. Remove the armrest.
2. Remove the beverage holder (A).
1. Pull up on the rear edge of the holder to release the hooks (B).
2. Release the front hooks (C), then remove the holder.
3. Release the clips (A) from the beverage holder opening, release the rear hook (B), then pull back the edge of the armrest cover (C) all the way
around and remove it.
4. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and
hooks.