CR-V LX 4WD L4-2.4L (2002)
4. Spraying primer surfacer
-
Spray about 4 to 5 coats to get 20 microns of thickness.
One coat deposits about 5 to 7 microns.
-
Do not try to cover the surface with one heavy coat. Apply several thin coats is recommended.
-
Use a 2-part urethane primer surfacer and a spray gun.
-
Mix the primer surfacer with the additive and solvent, and in the correct ratio.
-
Follow the primer surfacer manufacturer's instructions.
5. Drying
After spraying primer surfacer, allow 7 to 10 minutes of drying time, then force dry it with infrared lamps or an industrial dryer.
6. Polishing
Check the primer surfacer has dried thoroughly, then sand the primer surfacer.
Use a double action sander and #400~#600 disc sandpaper.
7. Intermediate coating and top coating.