CR-V LX 4WD L4-2.4L (2002)
11. With the specified air pressure applied, move the intake primary rocker arm (A) for the No. 1 cylinder. The primary rocker arm and secondary
rocker arm (B) should move together.
If the intake secondary rocker arm does not move, remove the primary and secondary rocker arms as an assembly, and check that the pistons in the
primary and secondary rocker arms move smoothly. If any rocker arm needs replacing, replace the primary and secondary rocker arms as an
assembly, and test.
12. Remove the special tools.
13. Tighten the camshaft holder mounting bolts to 22 Nm (2.2 kgf-m, 16 ft. lbs.).
14. Tighten the sealing bolt to 20 Nm (2.0 kgf-m, 14 ft. lbs.).
15. Install the cylinder head cover.
