CR-V LX 4WD L4-2.4L (2002)
7. Install the Evaporative Emission (EVAP) canister hose (A) and brake booster vacuum hose (B).
8. Install the throttle cable, then adjust the cable.
9. Install the cruise control cable, then adjust the cable.
10. Install the air cleaner housing (A), and connect the Intake Air Temperature (IAT) sensor connector (B).
11. Install the breather hose (c).
12. Install the intake manifold cover.
13. Clean up any spilled engine coolant.
14. After installation, check that all tubes, hoses and connectors are installed correctly.
15. Refill the radiator with engine coolant, and bleed air from the cooling system with the heater valve open.
