CR-V LX 4WD L4-2.4L (2002)
Variable Valve Timing Solenoid: Service and Repair
VTC Oil Control Solenoid Valve Removal/Test
VTC Oil Control Solenoid Valve Removal/Test
1. Remove the VTC oil control solenoid valve (A).
NOTE: Install the valve in the reverse order of removal with a new O-ring (B), and check these items:
-
Clean and dry the VTC oil control solenoid valve mating surface.
-
Coat the O-ring with engine oil.
-
Do not install the VTC oil control solenoid valve while wearing fibrous gloves.
-
Be careful not to contaminate the cylinder head opening.
2. Check the VTC oil control solenoid valve filter for clogging. If it is clogged, replace the VTC oil control solenoid valve.
3. Check the clearance between the port (advance side) and the valve. Clearance (A) should be at least 2.8 mm (1/8 in.).
4. Connect the battery positive terminal to the VTC oil control solenoid valve 2P connector terminal No. 2.
