CR-V LX 4WD L4-2.4L (2002)
13. Remove the discharge hose bolt, then disconnect the discharge hose from the condenser.
14. Swab the inside of the discharge line and the condenser passage.
^
If you find any metal particles or other debris, the condenser and discharge line must be replaced. Go to step 15.
^
If no metal particles or debris is found, go to step 16.
15. Remove the cap with 0-rings, the filter, and the desiccant bag from the receiver dryer.
^
If the desiccant bag is clean or slightly contaminated, go to REPAIR PROCEDURE B.
