CR-V LX 4WD L4-2.4L (2002)
Brake Warning Indicator: Testing and Inspection
Brake System Indicator Does Not Come on
Brake system indicator does not come on
1. Disconnect the negative cable from the battery.
2. Disconnect the multiplex control unit 13P connector and the ABS control unit 47P connector.
3. Check for continuity between the ABS control unit 47P connector terminal No. 13 and body ground.
Is there continuity?
YES - Repair short to body ground in the wire between the multiplex control unit and the ABS control units.
NO - Go to multiplex control system troubleshooting.
