CR-V LX 4WD L4-2.4L (2002)
Parking Brake Warning Switch: Testing and Inspection
Parking Brake Switch Test
1. Remove the driver's dash board under panel.
2. Disconnect the connector from the parking brake switch (A).
3. Check for continuity between the switch terminal (B) and body ground.
-
With the parking brake lever pulled (C), there should be continuity.
-
With the parking brake lever released (D), there should be no continuity.
NOTE:
-
If both the ABS indicator and the brake system indicator come on at the same time, troubleshoot the ABS.
-
If the parking brake switch and brake fluid level switches are OK, but the brake system indicator does not work, check the ABS.
