CR-V LX 4WD L4-2.4L (2002)
7. Remove the line bolt, then disconnect the suction line and the receiver line from the evaporator core.
8. Remove the passenger's dashboard undercover. Pull down on the front edge to release the clips. Pull the cover away to release the pins from the
holders.
9. Remove the right kick panel and the glove box.
10. Cut the plastic cross brace in the glove box opening with diagonal cutters in the areas shown. Remove and discard the plastic cross brace.
11. Remove the relays, then remove the bolts and the glove box frame.
12. Remove the ECM/PCM.