CR-V LX 4WD L4-2.4L (2002)
12. Check for continuity between PSP switch 2P connector terminal No. 2 and body ground.
Is there continuity?
YES - Repair open in the wire between the PSP switch and ECM/PCM (E16).
NO - Repair open in the wire between the PSP switch and G301.
13. Turn the ignition switch OFF.
14. Disconnect the PSP switch 2P connector.
15. Turn the ignition switch ON (II).
16. Measure voltage between ECM/PCM connector terminals A24 and E16.
Is there battery voltage?
YES - Replace the PSP switch.
NO - Go to step 17.
17. Turn the ignition switch OFF.
18. Disconnect ECM/PCM connector E (31P).
19. Check for continuity between body ground and ECM/PCM connector terminal E16.
Is there continuity?
YES - Repair short in the wire between ECM/PCM (E16) and the PSP switch.
NO - Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM, then recheck. If the
symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM.
