honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0341 Set|Page 3538 > < Engine Controls - MIL ON/DTC P0341 Set|Page 3532
Page 1
background image

Variable Valve Timing Solenoid: All Technical Service Bulletins
Engine Controls - MIL ON/DTC P0341 Set

02-041

December 3, 2002

Applies To: 
See VEHICLES AFFECTED

2002 Civic 3-Door and CR-V: MIL Comes On With DTC P0341
(Supersedes 02-041, dated September 24, 2002)

Updated information shown by black bars.

SYMPTOM

The MIL is on, and DTC P0341 [variable valve timing control (VTC) phase gap] is set.

PROBABLE CAUSE

The VTC control solenoid valve is temporarily stuck or contaminated.

VEHICLES AFFECTED

CORRECTIVE ACTION

Update the ECM/PCM software using the Honda

Interface Module (HIM), and, if necessary, replace the VTC control solenoid valve.

TOOL INFORMATION

You will need these tools and equipment items:

^

Interactive Network (iN) CD (July '02 or later)

^

iN Workstation

^

Honda Interface Module (HIM): T/N EQS05A35570

^

PC Interface Cable (RS232): T/N VET-02002532 This is the same cable you use to connect the PGM Tester to the HONDANET DCS workstation
or iN workstation when updating the PGM Tester program card or downloading DTCs to American Honda. The cable is blue with an attached
adapter.

^

AC Adapter (110 VAC/12 VDC Power Supply):
T/N VET-02002426

This is the same adapter used by the PGM Tester. These tools are already at your dealership. 

PARTS INFORMATION

Engine Controls - MIL ON/DTC P0341 Set|Page 3538 > < Engine Controls - MIL ON/DTC P0341 Set|Page 3532