CR-V LX 4WD L4-2.4L (2002)
PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Engine Stall/Stumble After a Stop
02-075
March 12, 2004
Applies To:
* See VEHICLES AFFECTED*
Engine Stumbles or Stalls After a Stop
(Supersedes 02-075, dated December 10, 2002)
Updated information is shown with asterisks and black bars.
SYMPTOM
When the fuel tank is about 3/4 full, the engine may stumble or stall after the vehicle comes to a stop.
PROBABLE CAUSE
Fuel sloshing in the tank causes a purge of fuel vapors to enter the engine.
VEHICLES AFFECTED
CORRECTIVE ACTION
Update the vehicle's ECM/PCM software from your December '02 or later Interactive Network (iN) CD.
TOOL INFORMATION
You will need these tools and equipment items:
^
iN Workstation
^
Interactive Network (iN) CD (December '02 or later)
^
Honda Interface Module (HIM): T/N EQS05A35570
^
PC Interface Cable (RS232): T/N VET-02002832
^
AC Adapter (110 VAC/12 VDC Power Supply): T/N VET-02002426
These tools are already at your dealership. To order additional HIMs, interface cables, or AC adapters, call the Honda Tool and Equipment Program at
1-888-424-6857. Phone lines are open Monday through Friday from 7:30a.m. to 7:00 p.m. CT.
WARRANTY CLAIM INFORMATION
