honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Technical Service Bulletins for Electric Load Sensor: > < Electrical - DTC P1298 Stored in ECM/PCM|Page 2642
Page 5
background image

^

Start the engine and let it warm up to its normal operating temperature (the cooling fans cycle twice).

^

Let the engine idle (throttle closed and all electrical items off) for 10 minutes.

17.

CR-V only: Reset the power window control unit:

^

Turn the ignition switch to ON (II).

^

Make sure the driver's window is fully closed.

^

Push down and hold the window switch until the window goes all the way down.

^

Pull back and hold the window switch until the window goes all the way up, then hold the switch for at least 2 more seconds.

18.

Enter the audio unit anti-theft code, and set the clock. Enter the audio presets.

Disclaimer

All Technical Service Bulletins for Electric Load Sensor: > < Electrical - DTC P1298 Stored in ECM/PCM|Page 2642