CR-V LX 4WD L4-2.4L (2002)
YES - Replace the speedometer assembly.
NO - Repair open in the BLU/WHT [WHT/GRN] wire between the VSS and the speedometer.
A/T:
Before testing, check the No.9 (10A) fuse in the under- hood fuse/relay box and the No. 10 (7.5A) fuse in the under-dash fuse/relay box.
1. Start the engine, and check the malfunction indicator lamp (MIL).
Does the MIL come and stay on?
YES - Troubleshoot the PCM DTC, and recheck.
NO - Go to step 2.
2. Check the multiplex control unit DTC.
Is the DTC indicated?
YES - Troubleshoot the DTC, and recheck.
NO - Inspect the connector and socket terminals of the gauge assembly connectors. If the terminals look OK, substitute a known-good the gauge
assembly and retest. If the problem is fixed, replace the gauge assembly. If the problem is not fixed, replace the PCM.
