CR-V LX 4WD L4-2.4L (2002)
Torque Converter Clutch Solenoid: Service and Repair
A/T Clutch Pressure Control Solenoid Valve A Replacement
Replacement
1. Remove the air cleaner housing.
2. Disconnect the A/T clutch pressure control solenoid valve A connector.
3. Remove the mounting bolts and A/T clutch pressure control solenoid valve A.
4. Remove the ATF pipe (B), ATF joint pipes (C), O-rings (D), and gasket (E).
5. Clean the mounting surface and fluid passage of A/T clutch pressure control solenoid valve A and the transmission housing.
6. Install the new gasket on the transmission housing, and install the ATF pipe and ATF joint pipes.
7. Install the new O-rings over the ATF joint pipes.
8. Install the new A/T clutch pressure control solenoid valve A.
9. Check the A/T clutch pressure control solenoid valve A connector for rust, dirt, and oil, then connect it securely.
10. Install the air cleaner housing.
