CR-V LX 4WD L4-2.4L (2002)
^
Within 1 to 4 seconds, turn the ignition switch to LOCK (0).
^
Within 1 to 4 seconds, turn the ignition to ON (II).
^
Within 1 to 4 seconds, push the transmitter lock or unlock button.
^
Confirm you can hear the sound of the door lock actuators. Within 1 to 4 seconds, push the transmitter lock or unlock button again.
^
Within 10 seconds, aim the transmitters (up to two additional ones) whose codes you want to store at the receiver, and press the transmitter
lock or unlock button. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.
^
Turn the ignition switch to LOCK (0), and pull out the key.
4.
Confirm proper operation of the transmitters.
Disclaimer
