CR-V LX 4WD L4-2.4L (2002)
6.
Remove the OPDS unit cover from the seat frame (Civic: three clips: CR-V: 1 screw).
7.
Position the seat-back to give you access to the two OPDS unit mounting screws.
8.
Remove the mounting screws from the OPDS unit and gently pull out the unit.
9.
Unplug the OPDS unit harness and sensor connectors, then remove the unit.
10.
Install the new OPDS unit. Reinstall the OPDS unit cover.
11.
Civic models: Slip the seat-back cover over the left side bolster.
12.
Zip the seat-back cover closed.
13.
Reconnect the negative battery cable.
14.
Initialize the OPDS (see S/B 02-052, Initializing the Occupant Position Detection System.
15.
Do the idle learn procedure:
^
Make sure all electrical items (A/C, audio unit, defogger, lights, etc.) are off. Start the engine, and let it warm up to its normal operating
temperature (cooling fans cycle twice).
^
Let the engine idle (throttle fully closed and all electrical items off) for 10 minutes.
16.
Civic 2-door EX and LX models up to VIN 1HGEM2... 1L016502: Do the cruise control learn procedure:
^
Drive the vehicle, and set the cruise control above 40 mph.
^
Keep driving the vehicle for 5 to 10 minutes.
NOTE:
