CR-V LX 4WD L4-2.4L (2002)
2005 CR-V:
^
Refer to page 20-72 of the 2005-06 CR-V Service Manual, or
^
Online, enter keyword TRIM, then select Interior Trim Removal/Installation-Rear Side Area from the list.
2.
Remove the retractor self-tapping screw and the retractor bolt.
3.
Using an X-acto knife, carefully remove any felt from the retractor tab.
4.
Install the floor boot.
5.
Repeat steps 1 thru 4 for the other side.
6.
Reinstall the seat belt retractors. Torque the retractor mounting screws to 4 Nm (3 lb-ft) and torque the retractor mounting bolts to 32 Nm (24
lb-ft).
7.
Install the rear side trim in the reverse order of removal.
Disclaimer