CR-V LX 4WD L4-2.4L (2002)
8. Remove the locknut (A) and the fuel tank unit.
9. Remove the fuel filter (B), the fuel gauge sending unit (C), the case (D), the wire harness (E), and the fuel pressure regulator (F).
10. When connecting the fuel tank unit, make sure the connection is secure and the suction filter (G) is firmly connected to the fuel pump (H).
11. Install the fuel tank unit in the reverse order of removal with a new base gasket (I) and new O-rings (J). Be sure to check these items:
-
When connecting the wire harness, make sure the connection is secure and the connector (K) is firmly locked into place.
-
When installing the fuel gauge sending unit, make sure the connection is secure and the connector is firmly locked into place. Be careful not to
bend or twist it excessively.
-
When installing the fuel tank unit, align the marks (L) on the fuel tank (M) and the fuel tank unit (N).
