CR-V LX 4WD L4-2.4L (2002)
7. Press a new wheel bearing (A) into the knuckle (B) using the old bearing (C), a steel plate (D), the special tool, and a press. Be careful not to
damage the sleeve of the pack seal.
NOTE (with ABS)
^
Install the wheel bearing with the magnetic encoder (E) (brown color) toward the inside of the knuckle.
^
Remove any oil, grease, dust, or other foreign material from the encoder surface. Keep magnetic tools away from the encoder surface.
^
Be careful not to damage the encoder surface when you insert the wheel bearing.
8. Install the snap ring (A), backing plate (B), and brake hose mounting bracket (C). Tighten the flange nuts and bolts to the specified torque.
