CR-V LX 4WD L4-2.4L (2002)
31. Install the new shift cable lock (A) to secure the shift cable end and shift cable end holder, then push the lock tab (B) up until it stops to lock the
joint.
32. Remove the 6.0 mm (0.24 inch) pin that was installed to hold the shift lever.
33. Connect the O/D switch/shift lock solenoid/park pin switch connector.
34. Move the shift lever to each gear, and verify that the A/T gear position indicator follows the transmission range switch.
35. Check that the shift lock solenoid operates.
36. Install the instrument panel and the driver's dashboard lower cover.