CR-V LX 4WD L4-2.4L (2002)
22. Align the marks (A) on the harnesses, and tie the harness band (B) over the marks. Clamp the O/D switch harness (C) 15 mm (0.6 inch) (D) from
the harness band.
23. Install the shift lever cover.
24. Install the shift lever assembly.
25. Turn the ignition switch ON (II), and verify that the R position indicator comes on.
26. If necessary, push the shift cable until it stops, then release it. Pull the shift cable back one step so that the shift cable is in R. Do not hold the shift
cable guide (A) to adjust the shift cable (B).
27. Turn the ignition switch OFF.