CR-V LX 4WD L4-2.4L (2002)
9.
Install the shift cable cover, and torque the three mounting bolts to 9.8 N.m (7.2 lb-ft) in the sequence shown.
10.
Center-punch a completion mark above the seventh character of the engine compartment VIN.
REPAIR PROCEDURE C
(Shift Cable Cover and Pin Kit: P/N 06241-PRV-305, H/C 7576333)
1.
Park the vehicle on a lift. Then apply the parking brake, shift the transmission to neutral (N), and raise the vehicle.
2.
Remove and discard the shift cable cover.
3.
Using brake cleaner and a clean shop towel, clean the new shift cable cover and the transmission in the areas where you will apply the foam tape.
