CR-V LX 4WD L4-2.4L (2002)
17. Install the shift lever knob (A) on the shift lever (B), and align the opening (C) of the switch so it is inclined 50° (D) toward the vertical axis (E).
18. Insert the new O/D switch harness wires (A) in the original harness tube (B), then tie a string (C) around the tube to secure the terminals in the
tube.
19. Pull the old tube out of the shift lever knob side to install the O/D switch harnesses.
20. Remove the old harness tube from the O/D switch harness terminals.