CR-V LX 4WD L4-2.4L (2002)
4. Reconnect the 20P connector to the switch, and perform the following input tests.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 5.
5. Disconnect the 20P connector from the switch connector, and make these input tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the control unit must be faulty; replace the power window master switch.
